Factory Direct Sale Quarter Turn Electric Actuator for Industrial Valves From China Manufacturer

Product Description

The FRYT series electric actuator is a quarter-turn electric actuator that can be used to control and adjust valves. Its on-off type products are suitable for applications with up to 60 starts per hour, and the regulating type products are suitable for applications with up to 1200 starts per hour. In addition, due to the addition of an intelligent control unit, the control is more accurate and the positioning is more precise.
Torque output range 50Nm (37lbf ft)-2000Nm (1476lbf ft).

Main Technical Parameters

1. Intrinsic error: ±1%
2.  Return difference: 1%
3.  Dead zone: 0.5% ~ 10% adjustable
4. Damping force characteristic: dead-beat
5. Protection level: IP67 (IP68 optional ) 
6. Environment temperature:-25ºC~ +70ºC
7. Relative Humidity: <95% (without condensation ) 
8. Power supply: 380Va.c(340V-440V), 50Hz/60Hz ЗPH 

The running performance of the actuator can be guaranteed in the case of the voltage error of ±10% and the frequency error of ±5 Hz. The actuator can start normally in the case of the maximum voltage drop of 15%, and can run as the normal speed.

Model	Revolving Speed (rpm)	Torque (Nm)	Voltage (V)	Phase (Ph)	Frequency (Hz)	Rated Current (A)	Duty	Weight  (kg)
FRYIT250	1	250	380	3	50	0.57	S4(30%)	23
FRYT500	0.5	500	380	3	50	0.57	S4(30%)	23
FRYT1000	1	1000	380	3	50	0.57	S4(30%)	37
FRYT2000	0.5	2000	380	3	50	0.57	S4(30%)	37

 

Model	Revolving Speed (rpm)	Torque (Nm)	Voltage (V)	Phase (Ph)	Frequency (Hz)	Rated Current (A)	Duty	Weight  (kg)
FRYT250	1	250	220	1	50	1.14	S4(30%)	23
FRYT500	0.5	500	220	1	50	1.14	S4(30%)	23
FRYT1000	1	1000	220	1	50	1.14	S4(30%)	37
FRYT2000	0.5	2000	220	1	50	1.14	S4(30%)	37

Output revolving speed of actuator
Due to the inertia effect and abrasion of the drive shaft sleeve, it is recommended that the running should not be too fast while installing in the  brake valve directly.
The rated torque is the maximum torque set in two directions. The maximum torque is 1.4 times to 2 times, depending on the valve speed and voltage.
In case of using the maximum torque as required while exceeding 20% of the valve travel, please contact us.

Model	A	B	C	D	E	F	(G)	(H)	(I)
FRYT1	306	124	160	135.5	202.5	277	430	338	54
FRYT2	308	121.5	160	123.5	245	340	428.5	368.5	52

Model	A1	A2	A3	A4	C	D1	D	E	F	F1	F2	H1	H2	H3	H4	H5	n-Φd1	4-Φd2
FRYT1	240	280	180	220	180	100	100	22	68.5	20	17.5	382	288	124	306	160	18	17.5
FRYT2	240	280	200	250	180	200	250	30	93	25	55	425	356	136	308	160	2-Φ20	22

Hart Communication Protocol
HART communication uses a half-duplex communication method, which is characterized by the realization of digital signal communication on the existing analog signal transmission line, which is a transitional product during the transition from analog system to digital system, so it has a strong The market competitiveness has developed rapidly. HART stipulates a series of commands, which work according to the command mode.
Profibus Communication Protocol
PROFIBUS is an international, open field bus standard that does not depend on equipment manufacturers. The transmission speed of PROFIBUS can be selected in the range of 9.6kbaud ~ 12Mbaud and when the bus system is started, all devices connected to the bus should be set to the same speed. It is widely used in manufacturing automation, process industrial automation and building, transportation and other fields of automation. PROFIBUS is a field bus technology used for factory automation workshop-level monitoring and field device layer data communication and control. 
Modbus Communication Protocol
Modbus is a serial communication protocol published by Modicon (now Schneider Electric) in 1979 for communication using programmable logic controllers (PLCs). Modbus has become the industry standard for industrial communication protocols (De facto) and is now the usual connection between industrial electronic devices.
Bluetooth Communication

ω  Visualization
ω  Debugging convenient
ω  Operation and monitoring functions 
ω  Diagnostic function
ω Diagnostic function

 

Certifications

FAQ

Q1.How about your price?
Although high quality but the price is vary favorable.
Q2. What is your MOQ?
A: 1 PC.
Q3. What is the delivery time?
A: It is about 1-7 days after we receive the payment.
Q4. How to make the payment?
A: We accept T/T, Paypal, Ali Trade Assurance,etc.
Q5. Do you have products in stock?
A: Yes, some stock can be shipped out within 3 days.
Q6. Do you test all your goods before delivery?
A: Yes, all products are fully inspected before delivery.
Q7. What is the warranty?
A: Our warranty is one year. After you receive the goods, if you find defect products, just take pics or videos to send us. We will re-make it for re-fund them to customers once we confirm it is our responsibilities.