Intelligent Waterproof Electric Drives Control Valve Multi Turn Electric Actuator

• Customization: Available
• After-sales Service: Always Online
• Warranty: 1 Year
• Model NO.: FRYQ25
• Analog Input Signal: 4 to 20mA Control Signal
• Analog Output Signal: 4 to 20mA Control Signal
• Motor Insulation Level: F
• Damping Characteristic: No Swing
• Motor Working System: S2
• Protection Level: IP67 (IP68 Optional)
• Voltage: 220V/1pH/50Hz 380V/3pH/50Hz
• Ambient Temperature: -10 Degree to 45 Degree
• Atmospheric Pressure: 86kpa to 106kpa
• Return Difference: Less Than or Equal to 1 Percent
• Adjusting Times: Starting Times Can Reach 600 Times/Hour
• Speed: 18rpm 24rpm 36rpm 48rpm and So on
• Fieldbus Contro: Support Profibus-Dpv0/Dpv1, Modbus, Canopen, etc
• Explosion-Proof Type: Explosion Proof Grade Exd II Bt4.
• Relative Humidity: Less Than or Equal to 95 Percent
• Transport Package: Wooden Case
• Specification: 46Kg
• Trademark: FRY
• Origin: Tianjin, China

Product Description

FRYQ-Multi-turn Electric Actuator 18-40 Type
The advanced intelligent non-invasive electric actuator can offer several option like multi-turn, part-turn and linear-turn.    
Sturdy construction, using dual-sealing, and can anti-water and dust    
(IP67/IP68-2m, 48 hours) effectively when filed connection.    
Three phase, single phase and direct current power supply actuator ,As the built-in data recording mechanism of the standard function    
Compatible With IrDATM standard. Make the local and remote analysis on the actuator through insight PC software.    
Concise, easy to control, and indication functions    
Multi-language text display screen displaying the state and setting    
Simple torque and position control, enhancing the reliability    
Flexibility of comprehensive control and indication    
Optional specification of water proof and explosion proof type    
Direct torque output range 35Nm(25 Ibf ft)-1200Nm(860 Ibf ft) 
Main Technical Parameters
1.Intrinsic error: ±1%
2.Return difference: 1%
3.Dead zone: 0.5% ~ 10% adjustable
4.Damping force characteristic: dead-beat
5.Protection level: IP67(IP68 optional)
6.Environment temperature: -25ºC ~ +70ºC
7.Relative Humidity: <95%(without condensation)
8.Power supply: 380Va.c(340V~440V), 50Hz/60Hz 3PH
The running performance of the actuator can be guaranteed in the case of the voltage error of ±10% and the frequency error of ±5 Hz. The actuator can start normally in the case of the maximum voltage drop of 15%, and can run as the normal speed.

Model	Revolving Speed (rpm)	Torque (Nm)	Voltage (V)	Phase (Ph)	Frequency (Hz)	Power (kW)	Rated Current (A)	Duty	Weight  (kg)
FRYQ18	18	136	380	3	50	0.37	3.3	S4(30%)	30
	24	108	380	3	50	0.37	3.3	S4(30%)	30
	36	72	380	3	50	0.37	3.3	S4(30%)	30
	48	54	380	3	50	0.37	3.3	S4(30%)	30
FRYQ25	18	400	380	3	50	1.1	5.8	S4(30%)	46
	24	400	380	3	50	1.1	5.8	S4(30%)	46
	36	298	380	3	50	1.1	5.8	S4(30%)	46
	48	244	380	3	50	1.1	5.8	S4(30%)	46
FRYQ35	18	610	380	3	50	1.5	9.5	S4(30%)	69
	24	610	380	3	50	1.5	9.5	S4(30%)	69
	36	542	380	3	50	1.5	9.5	S4(30%)	69
	48	474	380	3	50	1.5	9.5	S4(30%)	69
FRYQ40	18	1020	380	3	50	2.2	14.2	S4(30%)	190
	24	1020	380	3	50	2.2	14.2	S4(30%)	190
	36	845	380	3	50	2.2	14.2	S4(30%)	190
	48	680	380	3	50	2.2	14.2	S4(30%)	190
FRYQ70	18	1490	380	3	50	3	18.2	S4(30%)	200
	24	1490	380	3	50	3	18.2	S4(30%)	200
	36	1290	380	3	50	3	18.2	S4(30%)	200
	48	1020	380	3	50	3	18.2	S4(30%)	200
FRYQ90	18	2030	380	3	50	5.5	32	S4(30%)	200
	24	2030	380	3	50	5.5	32	S4(30%)	200
	36	1700	380	3	50	5.5	32	S4(30%)	200
	48	1355	380	3	50	5.5	32	S4(30%)	200
FRYQ95	18	3000	380	3	50	7.5	42	S4(30%)	200
	24	3000	380	3	50	7.5	42	S4(30%)	200

Output revolving speed of actuator
Due to the inertia effect and abrasion of the drive shaft sleeve, it is recommended that the running should not be too fast while installing in the  brake valve directly.
The rated torque is the maximum torque set in two directions. The maximum torque is 1.4 times to 2 times, depending on the valve speed and voltage.
In case of using the maximum torque as required while exceeding 20% of the valve travel, please contact us.
Hart Communication Protocol
HART communication uses a half-duplex communication method, which is characterized by the realization of digital signal communication on the existing analog signal transmission line, which is a transitional product during the transition from analog system to digital system, so it has a strong The market competitiveness has developed rapidly. HART stipulates a series of commands, which work according to the command mode.
Profibus Communication Protocol
PROFIBUS is an international, open field bus standard that does not depend on equipment manufacturers. The transmission speed of PROFIBUS can be selected in the range of 9.6kbaud ~ 12Mbaud and when the bus system is started, all devices connected to the bus should be set to the same speed. It is widely used in manufacturing automation, process industrial automation and building, transportation and other fields of automation. PROFIBUS is a field bus technology used for factory automation workshop-level monitoring and field device layer data communication and control. 
Modbus Communication Protocol
Modbus is a serial communication protocol published by Modicon (now Schneider Electric) in 1979 for communication using programmable logic controllers (PLCs). Modbus has become the industry standard for industrial communication protocols (De facto) and is now the usual connection between industrial electronic devices.
Bluetooth Communication

ω  Visualization
ω  Debugging convenient
ω  Operation and monitoring functions 
ω  Diagnostic function
ω Diagnostic function

                                                                                                          Actuator color can be customized
                                                                                                               Valve type can be customized

The technical selection of different types of valves gives you a comprehensive solution
Note:For better selection,need to provide the valve diameter,pressure,medium and temperature

Certifications

FAQ

Q1.How about your price?

Although high quality but the price is vary favorable.

Q2. What is your MOQ?
A: 1 PC.
Q3. What is the delivery time?
A: It is about 1-7 days after we receive the payment.
Q4. How to make the payment?
A: We accept T/T, Paypal, Ali Trade Assurance,etc.
Q5. Do you have products in stock?
A: Yes, some stock can be shipped out within 3 days.
Q6. Do you test all your goods before delivery?
A: Yes, all products are fully inspected before delivery.
Q7. What is the warranty?
A: Our warranty is one year. After you receive the goods, if you find defect products, just take pics or videos to send us. We will re-make it for re-fund them to customers once we confirm it is our responsibilities.